Advanced View Arduino Projects List

Arduino Project Ideas

Arduino is basically an open-source Micro-controller board. It is based on Microchip ATMega328P Micro-controller developed by Arduino.cc. The board has sets of analogue and digital input/output (I/O) pins that can interface different expansion boards and other circuits. Arduino has 6 analog pins, 14 digital pins, and students of top MTech colleges in Jaipur can program using the Arduino IDE (Integrated development environment) via a type B USB cable. It also accepts the voltages between 7 and 20 volts and powered up by USB cable or a 9V battery.

The production files and layout for some hardware versions is also available for the students of top engineering colleges in Rajasthan. Arduino UNO version 1.0 board is first in the series of USB Arduino boards and reference model for multiple Arduino platform. The ATmega328 on the Arduino Uno offers pre-programmed with a bootloader which enables you to upload new code to it without the use of an external hardware programmer. It communicates via the original STK500 protocol. The Arduino UNO 1.0 does not utilize the FTDI USB-to-serial driver chip. Instead, it uses the Atmega16U2 (Atmega8U2 up to version R2) majorly programmed as a USB-to-serial converter.

Special Pin Functions

Students of best MTech colleges in Rajasthan uses each of the 14 digital pins and 6 Analog pins on Arduino Uno as an input or output, using pinMode, digitalWrite, and digitalRead functions. However, these pins mainly operate at 5 volts. Each pin can offer or receive 20 mA as recommended operating condition and has an internal pull-up resistorof 20-50k ohm. A maximum value of 40mA must not be exceeded on any I/O pin to avoid permanent damage to the micro-controller. It has 6 analog inputs, that is labeled as A0 through A5, each of which provide 10 bits of resolution (i.e., 1024 different values).

Additionally, some pins have specialized functions as follows:

External Interrupts – Pins 2 and 3 can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value.
Serial- Pins 0 (RX) and 1 (TX) can be used to receive (RX) and transmit (TX) TTL serial data. Students of top Engg colleges can connect these pins to the corresponding pins of the ATmega8U2 USB-to-TTL Serial chip.
PWM (Pulse Width Modulation) – 3, 5, 6, 9, 10, and 11 can provide 8-bit PWM output with the analogue Write () function.
SPI (Serial Peripheral Interface) – 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK) support SPI communication using the SPI library.
TWI (Two Wire Interface) – A4 or SDA pin and A5 or SCL pin support TWI communication using the Wire library.
AREF (Analog REFerence) – Reference voltage can be used for the analog inputs.

Project Ideas for beginners

A giant pixel display using Arduino ?????

To read continue with ARYA COLLEGE

How technology is changing the world

Is Technology Changing Today’s Business Scenario

Every business requires appropriate data analytics to get the appropriate facts for decision making. Fortunately, the current data technology has made it easy for both small and big businesses to achieve this. In this era of big data, businesses receive an enormous amount of data from different sources. Hence, they have to follow a pattern of processes to get the most accurate results.

Data collection

Businesses have numerous sources of data. First, they get data points of sales where customers give their details. Many students of top engineering colleges are interconnected with data collection agencies that provide them with data. Also, businesses can use questionnaires on their websites and social media accounts to collect data.

Sorting data

This is where businesses work on the quality and separate data into logical parts before they start processing it.

Data processing

Data processing is all about analysis. Professional data analysis tools and even input from an expert of engineering colleges in India might be needed. The deeper the processing, the better the results.

Reporting

After the analysis is done, reporting follows. Businesses rely on these results to make their decisions such as selecting the best marketing strategies to apply and how to improve the product to suit the needs of their customers.

Technologies used in data analytics for businesses ?????

To read continue with ARYA COLLEGE

How to Start a Robotics Club at Engineering College Campus

The Robotics Club at Engineering College Campus

Robotics is an interdisciplinary branch of engineering and science which includes mechanical engineering, computer science, electronics engineering, and others. Robotics club mainly deals with the design, construction, operation, and use of robots. As well as computer systems for their control, sensory feedback, and information processing.

These technologies used by the students of Top MTech Colleges in Jaipur to develop machines. That can substitute for humans and replicate human actions. Robots can be used in different situations and for all purposes, but today many of them are used in dangerous environments like bomb detection and deactivation, manufacturing processes, or where humans cannot survive. Robots can take on any form but some of them are made to resemble humans in appearance. This will help in the acceptance of a robot in certain replicative behaviours usually performed by people. Such robots attempt to replicate walking, cognition, speech, lifting, and basically anything a human can do. Today, many robots inspired by nature by contributing to the field of bio-inspired robotics.

Is it difficult to set-up the Robotics Club?

While the robotics club largely benefits the student community and supports innovation happening within the campus, setting up a club is quite a daunting task for the students of engineering colleges India.

Proper care required while setting up the club, as the motiveis not to just start a club but to run it successfully for the years to come. Anyone can invest money, buy components or provide contract to organizations to setup a robotics club. That is the easy part and anyone with money can buy robots and setup a board and name it as Robotics Club. The real challenge is to make it in a way MTech students use it and build lots of projects.

A good robotics club of best engineering colleges in Jaipur is not the one with lot of robots and electronic components arranged neatly with posters all around the room. The best robotics club must be very active, where students go every day and build a number of innovative projects.

Identify the right team to run the Robotic club ?????

To read continue with ARYA COLLEGE

Enabling Success for Engineering Students

Can Engineering Learning Influence Your Success

Success in college is based on a combination of factors like family support, academic preparedness, life skills, and decision-making abilities of the graduates of Engineering Colleges in Jaipur. To become a super learner in the ever-changing world, it is one of the essential tasks to succeed. In a world of a new age of technological change, the capability to find out a new ability is rapidly becoming a requirement. It is easy to go on auto-pilot, but learning new things brings many benefits for the students of Top Engineering Colleges in Jaipur.

Experts believe that every person has the brainpower to master a new discipline with the right technique. If students of Top BTech Colleges in Rajasthan want to learn something new or brush up their current skills, they must keep reading. Under given are some popular habits of super learners. Most of them have enough brainpower to learn a new subject. They just need to utilize the ideal tools, strategies, or use what they know properly.

Strategies of Super Learners

Super learners read a lot. Successful learning strategies could make the process enjoyable. The trick to skill acquisition is not complex. In order to increase your career, students of Best BTech Colleges in Jaipur should learn a skill this season. A few of those habits can be practical for you. A Good learner read a lot. It provides the freedom to roam the expanse of knowledge of space, history, time, thoughts, ideas, emotions, and more to the learners.

Basically, reading is the best source of continuous knowledge, learning, and acquiring more of that money. Many of the very prosperous men and women share this admiration for studying. They do not consider reading significant. Also, it is a chance to enhance their lives, professions, and companies.

View learning as a habit ?????

To read continue with ARYA COLLEGE

Major Sectors for Internship MTech in Computer Science

Internship for Computer Science Majors

In a computer science majors, an internship is one of the best ways to explore career paths in the tech industry. Additionally, to learning on-the-job responsibilities. Students of computer science engineering will also discover what types of team dynamics best suitable their style of working. As an intern, they will usually be paired with a more experienced engineer who will act as their mentor. Providing them guidance on the technical aspects of their project as well as helping them to manage and execute it.

While an engineer does not have to go into engineering just because they are a computer science major. An internship will offer them the opportunity to see what the field is like. And whether it is perfectly suitable for them. This is because computer science majors are very in demand among employers. The internship is also likely to be very well compensated.

There are various different types of internships for computer science majors.

Front-End Engineering Intern

As a front-end engineering intern, students of best engineering colleges Rajasthan will gain real-world experience working on the user-facing portion of a website or application. In addition to writing code in CSS, HTML, and Java-script, they will also be testing and debugging that code to ensure that the user experience is as smooth and immersive as possible. During an internship, they will get experience in executing challenging projects and helping to build incredible products.

Back-End Engineering Intern

As a back-end engineering intern, students of Best MTech Colleges in Jaipur will be working with the data that powers a website or application and using programming languages like Ruby, Python, and Java to connect the server, application and database. Similar to a front-end developer, their responsibilities will include writing code pertaining to your project and testing the code to ensure a robust finished product. Also, they will be responsible for debugging and figuring out which parts of their product are not working properly. In addition, they will most likely go through code reviews to make sure that they develop best practices and that they learn to work in an agile development environment.

Full-Stack Software Engineering Intern ?????

To read continue with ARYA COLLEGE

How VR Development is a Great Career Option for Programmers

Virtual Reality Development – Great Career Option for Programmers

Virtual reality seems to be the most promising career. Career planning requires one thing for sure i.e., prior planning. This career field seems promising for long. Programmers always have to search for something new to keep them forward of the race. For them, learning the Virtual Reality development seems to be a good option in present days.

From HTC Vive to Sony Playstation VR, we have seen howVR device making their debut in the market. In the near future, students of Engineering Colleges in India will see a flood of devices in the market equipped with VR technology. Thus, when the market is ripe for it, why not enter in this secured field to make a career. There are various different reasons which make VR development a great opportunity for programmers.

There are various aspects of Virtual Reality Development, includes the following:

Requires Creativity

This field is very popular these days, but then also people are not much clear about it. Even the good programmers of Computer Science Engineering Colleges in Jaipur think that VR development is too technical, while in originality, it is not so. Although the field is technical, but then also this field requires more of creativity than technicality.

Technology develops after some creative idea considered. Thus, for all the creative programmers, Virtual Reality development is a field which provide them a chance to mix their field of expertise with creativity. Some programmers believe that they are stuck with the same old programming patterns and their creativity is getting a back hand. VR development is just chosen for such type of programmers. Try to experiment on this.

High Earning Potential

Nobody can deny from the fact that career is directly linked with a handsome salary expectation. Currently, there are lots of financial interests in the VR field. Confidence is safe to associate yourselves with this field for the sake of a good career growth. Day-by-day new companies are launching and many-a-investors are lining up to invest in this industry, which opens a pool of opportunities for the VR developers and programmers. It is estimated by the students of best btech colleges in Jaipur that in the coming 5 years, the investment in this field is going to multiply at least 5 times of its present value.

Early adoption is best ?????

To read continue with ARYA COLLEGE

Software – Video Games Engineering

Computer Games for engineers in 2021

There are computer games for engineers of Top BTech Colleges in Jaipur regardless of the industry like construction, space, civil engineering, or physics. They are a great way to unwind after a long day. But many of them are fantastic ways to maintain a sharp memory and brain function. A research has been conducted which shows that the action games can actually expand the brain’s cognitive abilities. Thus, you must ensure to work hard and play harder by incorporating one of these games into your downtime schedule.

Also, these computer games are great for inspiring youngsters by introducing them to engineering-related games. There are some potential gifts for the engineers in your life.

Construction Games for Engineers

Minecraft

There are so many building games out there, it can be tricky to know where to begin. Also, one of the first games by engineers across the board is Minecraft. This is a super-accessible game suitable for all ages, but it also has an appeal that is difficult to resist. Using simple tools, it creates structures that help students of Best Engineering Colleges in Rajasthan to survive the Minecraft universe. A truly amazing feature of this game is that they can use special sequences of blocks to create a fully-functioning digital computer.

Factorio

Factorio is a great early-access game based on the idea of building and maintaining factories. Players assume the role of an engineers of top BTech colleges surrounded by abundant resources. That must be managed and utilized. From mining resources and researching technology to automating production and fighting enemies, this game is perfect for construction things. Starting out with the basics, players start by chopping trees and transporting resources by hand. Eventually, the hard work pays off, and players become industrial powerhouses who can collaborate with friends and contribute to the design of features within the game.

Physics Games for Engineers ?????

To read continue with ARYA COLLEGE

INFORMATION TECHNOLOGY PROJECT TOPICS

Top Project Topics for Information Technology final-year graduates

Engineering students from top Information Technology college in Jaipur aims to have some of the achievements during his engineering life. So, it includes the creation of projects that can be useful to the society around him as well as for him. Information Technology is an engineering branch just like Computer Science Engineering. It involves the study of various computer applications, different programming languages, study of software and hardware, and many more.

The final year of a BTech graduation course is one of the most important stages of your education and professional grooming. While the initial three years of science stream graduation courses like Computer Science and Engineering (CSE), Information Technolgy (IT), Computer Engineering (CE)/Computer Science (CS), and Electrical and Computer Engineering (ECE) focuses on theoretical aspects in the final year, students get to put their theoretical knowledge to test. Students work on both practical assignments and projects.

The main goal behind including final year projects in the course curriculum is to encourage the students of best engineering colleges in Rajasthan to apply their theoretical knowledge to practical use. Working on final year projects enable them to couple their intellectual faculties with practical skills to solving real-world engineering and business problems.

In an engineer’s life, the most difficult part is to get a job. If he is willing to, he must differentiate himself from others for which he needs achievements and project works too. So that he can prove himself to be a liable asset to the organisation for which he is going to work. These Final year projects for Information Technology ideas below can be useful to the students of engineering colleges in Jaipur.

Face Recognition Door

It might be difficult for you to open the door everytime by yourself or when a family member wants to enter the room. Thus, students of Top BTech College in Rajasthan helps you design your own Face Recognition System for door to consume lots of time. A Facial Recognition System is a technology that is capable of identifying or verifying a person from a digital image or a video frame from a video source. There are various methods in which facial recognition systems work. Generally, they work by comparing selected facial features from given image with faces within a database.

Android Application Development Technology ?????

To read continue with ARYA COLLEGE

A Guide to Neural Networks

Neural Networks used by Artificial Intelligence

Neural Networks are a subset of Machine Learning techniques which learn the data and patterns in a different way. It also utilizes Neurons and Hidden layers. Neural Networks are powerful due to their complex structure and can be used in applications by the students of Best BTech College in Jaipur.

What are Neural Networks?

Neural Networks use the architecture of human neurons with multiple inputs, a processing unit, and single/multiple outputs. There are weights related with each connection of neurons. By adjusting these weights, a neural network arrives at an equation which is used for predicting outputs on new unseen data by the students of engineering colleges in Jaipur. It can be done by backpropagation and updating of the weights.

Various Types of Neural Networks

Different types of neural networks are used by the students of BTech colleges for different data and applications. The different architectures of neural networks are particularly designed to work on those types of data or domain. There are some basic and some complex ones includes the following:

Perceptron

The Perceptron is the most basic form of neural networks. It consists of just 1 neuron which takes the input and applies activation function to produce a binary output. It does not contain any hidden layers and can be further used for binary classification tasks. Additionally, the neuron does the processing of input values with their weights. Then, it passes to the activation function to produce a binary output.

Feed Forward Network ?????

To read continue with ARYA COLLEGE

Engineering kits for college students

Engineering Kits for BTech Graduates

Engineering Kits for BTech College Students can help them both in their projects and technical stuff. Before learning about the various kits, it is important to understand and learn the Engineering skills. Engineering is an industry that mainly focuses on Skills. Engineering can be done by everyone, as long as they have a passion to find out problems and solving them, which is basically known as problem-solving. In this field, engineering aspirants equipped with creative Engineering problem-solving techniques and some of the fundamentals for balanced skills.

There are various branches of Engineering which mainly require some kits to perform and practice skills. One of the common kits required for the students of Top Engineering Colleges in Jaipur is a basic Engineering drawing kit. It consists of measuring equipment like Rulers (0-30cm or 15cm), safety point compass and dividers, eraser, lettering guide, sharpener, protractor (360 deg or 180 deg), mgraphite pencil or mechanical pencil (4H, 2H, 2B, 4B, etc which are used as indicators, B to H spectrum pencils), mini drafter. These kits are beneficial while creating an Engineering Drawing. It helps them learn the design of materials, projecting their information via charts and drawings.

There are some of the basic kits that help you with your projects including the following:

A pendulum – This will teach students of engineering colleges Rajasthan about controls, DC motors, programming, and some dynamics. Also, they can build the whole system, which will give then experience with fabricating.
A robotic arm – This will extend an individual’s knowledge from all the things in the pendulum project.

Engineering graduates can build something (e.g., active cooler) with a Peltier device. This will provide some experience with thermodynamics and material choice if they optimize. Sensors and data collection from the above projects with which students of Best BTech Colleges in Rajasthan could also easily get some experience. For instance, measure the temperature of whatever they are heating/cooling. Use a piece of aluminum and a strain gage to look at strain, stress, and thermal expansion. They can do this with a freezer as well.

Besides these, Mechanical Engineers of best engineering colleges use the ALGORITHM tool in many forms. An algorithm is an effective method with an intention behind its form, which is mainly expressed within a finite amount of space and time and in a well-defined formal language for producing a useful operational function. Starting from an initial state and initial mental “input”, the mental instructions shows a computation or an action that, when executed with an algorithmic device, proceeds through various successive states, eventually producing an “output” and terminating at a final ending state.

Essential engineering Kits for an Electrical Engineer ?????

To read continue with ARYA COLLEGE